Step 1. Carefully remove a basic elf warrior and an arm holding a spear from the frame. It is best to do this using Mantic Clippers rather than twist them off or use a knife as you might damage the model (or yourself
!)
Step 2. Gently attach the spear arm to the elf warrior. It will hold in place, even without glue! Now, carefully remove a square base from its frame, and push your Elf Spearman into place. You are done!
Step 3. Once you are happy with the pose of your Elf Spearman, you might like to glue the arm on more permanently. Use plastic glue to glue it in place. You can also glue your Spearman onto its square base.
Hint: Before you glue your models together, you might like to assemble your Elf Spearmen and put them into formation. By doing this, you can adjust their spears and position on their base to make sure they are not getting in each others way!
Step 4. If you want to take things further, you can attach extra equipment onto your Elf Spearman.such as a shoulder pad. Finally, you can attach the shield sticker to your Spearman’s shield if you like.
Hint: If you are intending to paint your model, then you might like to wait until you have painted it before attaching the shield sticker.